IDP 100 Series  (Preliminary)
  The IDP 100 series are designed to be integrated into larger systems for use with the two-way Inmarsat IsatData Pro satellite service.

Technical Specifications

Satellite Communication
Satellite Service               Two-way, IsatData Pro
Coverage                         Global
From-Mobile Message      6,400 bytes
To-Mobile Message          10,000 bytes
Typical Latency                <15 sec, 100 bytes
Elevation Angle                (IDP-680) +20° to +90°
Elevation Angle                (IDP-690) -5° to +90°
Frequency                        Rx:1525.0 to 1559.0 MHz / Tx:1626.5 to 1660.5 MHz
EIRP                                 (IDP-680/IDP-690) 7.0 dBW/5.0 dBW

Acquisition Time             Warm: 8 sec.  Cold: 36 sec.
Accuracy                        4 m (CEP)
Sensitivity Acquisition    -136 dBm  /  Tracking: 146 dBm
High Sensitivity GPS option available.

External Interfaces
Serial                             Serial CMOS / TTL compatible

Input Voltage                 3.0V, 3.3/6.3V
Power Consumption      Receive: TBD   Receive with GPS: TBD   Transmit: TBD   Sleep: 50µA

Mating Connector Samtec TSH 20-01-L-DMA or equivalent

AT command set.              GPS NMEA  

IDP 180 / IDP 190            TBD ( cm x cm x cm /  g)

Operating Temperature:  -40°C to +85°C
Storage Temperature:     -40°C to +85°C
Dust & Water Ingress:    TBD  (IP )
Vibration :                       SAE J1455 (Sec 4.9, 4.2) MIL-STD-810G (Sec 514.6)
Shock:                            MIL-STD-810G (Sec 516.6)
Load Dump Protection:  SAE J1455 (Sec 4.13)

Operating Temperature: -40°C to +85°C
Storage Temperature:   -40°C to +85°C

Certification pending
Satellite:   Inmarsat Type Approved
Other:       CE Mark, FCC (47 CFR 25), RoHS, Anatel

Order Specs:  packaged antenna (IPD180) / unpackaged antenna

Modem with remote satellite antenna includes 5m cable with xxx connector. Variable length cables are available.



back to Isat Data Pro