|
DMR 800D CLASS 1 DIVISION 2 SATELLITE/MODBUS TERMINAL
|
|
The compact DMR-800D C1D2 terminal is a fully certified Class 1, Division 2: Hazardous Environment (C1D2) Groups A, B, C & D, built with a durable rugged casing and native Modbus support. The terminal is ideal for use with storage and transport tanks for oil and gas, chemical or agricultural industries and for integration with new or existing SCADA systems.
|
|
FEATURES
|
Two-Way Communication
Report data by schedule or events, request instant GPS location, monitor status of local sensors or change device reporting intervals.
Low Message Latency
Enjoy immediate communication to and from the asset. No long delays.
Geofencing Capabilities
Identify areas of interest and program special reporting intervals based on location.
Low Power Modes
Hibernate and other power options allows customers to operate the device in ultra-low power modes, significantly increasing battery-life for remote monitoring applications.
Sensor Ports (Digital and Analog I/Os)
Monitor and control local devices, detect power failures or report when machinery is activated.
Flexible Billing Plans
Enjoy competitive pricing and provide more remote monitoring applications.
Customizable and Easy Programming Interface
Get to market faster and create unique solutions.
Over-the-Air Programming Capability
Make quick and easy terminal configuration changes according to shifting business needs, reduce downtime and minimize travel and labor costs.
Easy Installation and Maintenance
Reduce deployment and operating costs with a product that features a fully sealed and water proof enclosure.
Global Coverage Based on Inmarsat IsatM2M
Offer a global solution that operates over land and sea and includes automatic ocean region switching capabilities.
|
|
Technical Specifications
|
PHYSICAL
|
|
|
ENVIRONMENTAL |
|
Size
Mass
|
160mm (diameter) x 47 mm (height)
C1D2 mounting kit adds 70mm to height
~ 535 g
|
|
Operating Temperature
|
-40°C to +85°C
|
ELECTRICAL
|
|
|
Storage Temperature
|
-40°C to +85°C
|
Input Voltage
|
9 VDC to 32 VDC |
|
Humidity
|
95% Relative Humidity at +30°C non- condensing
|
Power Consumption (Typical @ 12VDC, 22°C ) |
Transmit mode: 10.5 W
Tracking mode (GPS on): 1.0W
Hibernate mode: 0.24mW
|
|
Dust & Water Ingress
|
IP67/NEMA-4X
|
RS485 ESD
|
± 15kV HBM
|
|
Vibration
|
5-20 Hz; 1.92 m2/s3 random noise 20-500 Hz: -3dB octave random noise
|
Mating Connector |
Conxall Mini-Con-X® 6282-8SG-3DC
|
|
Shock (survival)
|
Half sine 6ms, 300 m/s2
|
SATELLITE MESSAGING
|
|
|
GPS
|
|
From-Terminal
|
Up to 192 bytes
|
|
Channels
|
16 channels; 1575.42 MHz |
To-Terminal
|
4 alert codes + up to 100 bytes |
|
Acquisition |
Cold-start: 34s - SuperSense®: -148 dBm |
|
|
|
Accuracy |
2.5 m CEP; 5.0 m SEP |
SATELLITE COMMUNICATIONS (D+/ISATM2M)
|
|
|
|
Frequency
|
Rx: 1525.0 to 1559.0 MHz Tx: 1626.5 to 1660.5 MHz
|
|
EIRP
|
9 dBW max
|
|
SECURITY |
|
Elevation Angle
|
0 to +90 degrees
|
|
Jamming
|
GPS jamming detection |
|
|
|
Programming
|
Script encryption capability |
EXTERNAL INTERFACES
|
|
|
|
|
Serial
Analog/Digital
|
- RS232: console interface
-
Supports optional NMEA output
-
Password-protected access
-
4 Software-configurable
- input/output
- Digital or 10-bit A/D input
- Digital output; max sink 250mA
- 4-20mA current detection (pin 8 only)
|
|
CERTIFICATIONS / COMPLIANCE
|
|
PROGRAMMING
CAPABILITIES |
Satellite
Regulatory
MEMORY
Data Log Capacity
|
Inmarsat D+/IsatM2M Type Approved
ANSI/ISA-12.12.01 -2007 (supercedes UL1604); CAN/CSA C22.2 No.142,213; UL916; UL50
CC, RoHS, Anatel, IC pending
CE0 Mark (R&TTE)
320kB; Up to 17,200 positions
|
|
Script Logic
Modbus
|
- 128 Actions
- 64 Alarms
- 64 Timers
- 32 Data transformers
- 2 programmable I/O lines - digital or analog
- 128 Geofences (circular, rectangular, polygons)
- Low Power
- Read/write up to 64 registers
|
ORDERING CODES
|
|
|
|
|
SM200287-4LG |
DMR-800D C1D2 with bottom-mount connector - RS485 Modbus (requires external termination)
|
|
|
top
back to IsatM2M
|
|
|
|
|