|
|
|
IsatData Pro
|
|
Features
- A low data rate service ideal for remote management of fixed assets including tracking and telemetry, IsatData Pro operates in near real-time anywhere in the world.
- With burst-mode communication and a gateway for store-and-forward messaging, IsatData Pro also offers a convenient web-based portal for adjusting settings.
- Applications can be run on the terminal to reduce data sent over the air. Suitable for mission-critical applications, it offers a wide range of protocols for data collection.
Performance and latency
- Send 6,400 bytes and receive 10,000 bytes, with a latency of 15-60 seconds depending on message size.
Reliable network
- Operates over the I-4 global satellite network, with an availability of 99.9 per cent.
No roaming charges
- IsatData Pro is provided over Inmarsats global network so there are no roaming charges.
Global coverage
- IsatData Pro is available across the globe, apart from the extreme polar regions.
Lower costs
- Competitive hardware and airtime packages compared with rival satellite services.
Applications
- Applications enabled by IsatData Pro for IDP terminals
- From OTP fleet management and analytics to remote monitoring and SCADA control, machine-to-machine (M2M) software applications for IsatData Pro terminals help our partners and customers get to market quickly, reduce programming costs, enhance the capabilities of industry-standard devices, remotely connect to complex enterprise systems and much more.
Fleet Management
- OTP AVL: Automatic Vehicle Location (AVL) is a platform for quickly configuring IsatData Pro terminals for fleet management solutions. Configure GPS position reporting frequency, start/stop reports, speeding thresholds, idling notifications, fuel and panic button events and more.
- OTP Garmin: Garmin Dispatch allows IDP terminals to communicate with off-the-shelf Garmin personal navigation devices (PNDs) for integrated tracking, navigation, driver communication and dispatch using Garmin devices as the human interface.
- OTP Analytics: Analytics transforms raw data collected by IDP terminals into valuable information used for tracking key performance indicators (KPIs) when assessing driver behaviour and vehicle/asset performance.
- OTP J1939: Designed for use with the IDP 700 series satellite-cellular terminals, the J1939 extracts parameter values from a vehicles CANbus for applications such as driver behaviour monitoring and vehicle assessment
OTP - SCADA & Fixed Equipment
- OTP ARC: The Alert, Report, Control (ARC) is OTP implemented feature that transforms an IsatData Pro satellite terminal into a low cost Remote Terminal Unit (RTU) capable of sending regular and event-based reports on equipment status, operating parameters, flow rate and more.
- OTP SCADA: SCADA is an OTP feature end-to-end solution providing connectivity between remote field instruments and enterprise systems for the oil & gas, utilities, heavy equipment and industrial automation markets. It provides the ability to process data from one or more SCADA devices into valuable information thereby reducing monthly airtime costs. This service is Modbus-compatible.
- OTP IP SCADA: An IsatData Pro service, IP SCADA allows OTP SCADA to poll information from the serial ports of remote devices like RTUs and PLCs in scenarios where the system leverages VPN connections directly to he OTP platform for our customers, incl. to private IP addresses. The service is Modbus-compatible.
|
|
|
IDP 680 IsatData Pro Modem (discontnued)
|
|
Overview Note: Repalced by the new ST 6100. |
|
The IDP 680 IsatData Pro modem is designed to work on Inmarsat's global satellite constellation, providing for 2-way text and data communications with your assets.
Whether used for managing trucks, fishing vessels or oil & gas equipment, the IDP 680 IsatData Pro modem increases business efficiency, lowers operation costs and enables compliance with government regulations. Applications include transferring electronic documents and vehicle telemetry information, text- messaging remote workers and maintaining up-to- date driver logs and many more.
The IsatData Pro service is designed for mission- critical applications. All messages are delivered within seconds, making IsatData Pro ideal for sending information to people operating in high-risk areas, reporting alarm conditions and retrieving logs from remote equipment during an emergency.
Inmarsat IsatData Pro network allows download of near real-time messages of up to 10,000 bytes to any device, and upload up to 6,400 bytes from the device. This increase in data packet size and transmission speed meets customer demands for higher data capacity and reduced latency in machine-to-machine (M2M) solutions.
There is also an off-the-shelf front-end application available with the ISAT IDP 680 to allow you to track and monitor assets/vehicles with our Online Tracking Platform.
Key Features
- Integrated GPS for location-based services
- Environmentally-sealed enclosure for outdoor installations
- Low-power modes for battery-powered applications
- Peripheral interfaces for connecting to analog, digital and serial devices
- Serial interfaces for connectivity to RS485/ J1708 and Modbus interfaces
- Programming capability and user tools for quick customization to meet business needs
- OTP, Full front-end tracking monitoring application available to support IDP 680
|
5 Reasons to Choose the IDP-680 / 690 Series for Fixed and Mobile Asset Tracking
1. Send More Data, More Quickly Send date over the Inmarsat IsatData Pro satellite service, which delivers richer M2M data.
2. Two-way Communication Track vehicles, vessels, fixed and mobile oil and gas assets and more.
3. Fully Programmable and Feature-rich Includes programming capabilities, panic buttons, text messaging as well as sensor ports for fuel, temperature and more.
4. Quicken Deployment and Time-to-Market Remove programming burden and enable quicker deployment for custom fleet management and SCADA monitoring applications.
5. Unparalleled Customer Support Available to solution providers and system integrators as part of an easy to use starter kit, including free activations, airtime and support.
|
|
|
IDP 690 IsatData Pro Marine Modem (discontnued)
|
|
Overview Note: Repalced by the new ST 6100. |
|
The IDP690 IsatData Pro modem is designed to work on Inmarsat's global satellite constellation, providing for 2-way text and data communications with your assets for marine monitoring/tracking applications.
Applications include transferring electronic documents and boat telemetry information, text-messaging staff on ships, and maintaining up-to-date logs...
The IsatData Pro service is designed for mission- critical applications. All messages are delivered within seconds, making IsatData Pro ideal for sending information to people operating in high-risk areas, reporting alarm conditions and retrieving logs from remote equipment during an emergency.
Inmarsat IsatData Pro network allows download of near real-time messages of up to 10,000 bytes to any device, and upload up to 6,400 bytes from the device. This increase in data packet size and transmission speed meets customer demands for higher data capacity and reduced latency in machine-to-machine (M2M) solutions.
There is our hosted Online Tracking Platform application available with the ISAT IDP690 to allow you to track and monitor assets/boats.
Key Features
- Designed for marine applications
- Integrated GPS for location based services
- Environmentally sealed enclosure suitable for marine use
- Low-power modes for battery-powered applications
- Peripheral interfaces for connecting to analog, digital and serial devices
- Serial interfaces for connectivity to RS485/ J1708 and Modbus interfaces
- Programming capability and user tools for quick customization to meet business needs
- OTP tracking monitoring application available to support IDP690
|
|
|
SPECIFICATIONS� IDP 680 & IDP 690 |
|
The IDP 600 series terminals use the two-way Inmarsat IsatData Pro satellite service for remotely managing fixed and mobile assets anywhere in the world.
|
Satellite Communication |
|
Satellite Service |
Two-way, IsatData Pro |
Service Coverage |
Global |
From-Mobile Message |
6,400 bytes |
To-Mobile Message |
10,000 bytes |
Typical Latency |
<15 sec, 100 bytes |
Elevation Angle (IDP-680) |
+20 to +90 |
Elevation Angle (IDP-690) |
-15 to +90 |
Frequency |
Rx:1525.0to 1559.0 MHz Tx: 1626.5 to 1660.5 MHz |
EIRP(IDP-680/IDP-690) |
7.0 dBW/5.0 dB |
|
|
GPS |
|
Acquisition Time |
Hot: 1 s; Cold: 27 s |
Accuracy |
2.5 m (Horizontal CEP) |
Sensitivity |
Acquisition: -147 dBm / Tracking: -159 dBm |
|
|
EXTERNAL INTERFACES |
|
Inputs/Outputs |
4 - Analog or Digital In/Out |
Serial |
1 -RS232, 1-RS485 |
|
|
ELECTRICAL |
|
Input Voltage |
9 to 32V, Load Dump Protection: +150V |
Power Consumption (Typical@12VDC, 22C) |
Receive : 8.3 mA / GPS : 40 mA / Transmit: 0.75 A/ Sleep: 100 μA |
|
|
SENSOR |
|
Onboard accelerometer to detect vehicle motion |
|
|
|
PROGRAMMING |
|
Lua scripting engine with core services. SDK with GUI development tools available |
OTP - Online Tracking Platform |
Geofence, Management, Fleet Management, History, and more... |
Core Services |
Geofence, Data Logger, Position Reporting |
User Data Memory |
2 MByte for Users services, data files including data logger |
Over-the-air programming capabilities to meet shifting business needs and reduce travel costs via OTP
|
|
|
MASS |
|
IDP-680/IDP-690 460 g |
|
|
|
DIMENSIONS |
|
IDP-680 Land Terminal |
Height 4.9 cm Wide 12.6 cm Deep 12.6 cm |
IDP-690 Maritime Terminal |
Height 10.1 cm Wide 12.6 cm Deep 12.6 cm |
|
|
ENVIRONMENTAL |
|
Operating Temperature |
-40C to +85C |
Storage Temperature |
-40C to +85C |
Dust & Water Ingress |
IP67 |
Vibration |
SAE J1455 (Sec 4.9.4.2 fig 6-8) MIL-STD-810G (Sec 514.6) |
Shock |
MIL-STD-810G (Sec 516.6) |
Load Dump Protection |
SAEJ1455 (Sec 4.13) |
|
|
CERTIFICATION |
|
Satellite |
Inmarsat Type Approved |
Other |
CE Mark, FCC, IC, RoHS, Anatel, SRRC (IDP-690 only), MSS Russia |
|
|
ORDERING CODES |
|
SM201085-SXG IDP-680, Side-mount |
For general remote asset management and communications |
SM201085-BXG IDP-680, Bottom-mount |
For general remote asset management and communications |
SM201087-SXG IDP-690, Side-mount |
Engineered for maritime and low elevation-angle applications |
SM201087-BXG IDP-690, Bottom-mount |
Engineered for maritime and low elevation-angle applications |
SM201079-BxG IDP-690, Bottom-mount, C1D2 |
Engineered for maritime and low elevation-angle applications |
SM201080-BxG IDP-690, Bottom-mount, C1DD2 |
Engineered for maritime and low elevation-angle applications |
|
|
|
|
IsatData Pro ST 6100
|
|
|
|
Overview
|
|
The next generation satellite terminal more powerful, more versatile, more coverage.
Reliably track, monitor and control assets in some of the word's most isolated regions.
ST 6100 satellite terminal delivers complete visibility and control of industrial assets operating in remote areas. The versatile, environmentally sealed ST 6100 can be installed on mobile assets such as light-and heavy-duty commercial vehicles, railcars, fishing vessels, heavy equipment and more. With two-way satellite connectivity, the ST 6100 is ideal for remotely monitoring and controlling fixed and portable assets used in SCADA applications such as those in the energy sector, where access may be restricted, including pipelines, flow meters, pumps, generators and tanks.
Easy integration
EX4U Telecom makes it easy to bring loT solutions to market.
The fully programmable ST 6100 includes comprehensive resources to facilitate integration into a wide range of our custom solutions.
Global satellite connectivity
The ST 6100 delivers reliable global communications over the IsatData Pro satellite service for uninterrupted visibility of operations and access to business-critical field data in even some of the world's most remote locations. And because of its two-way connectivity, users can remotely control assets without sending workers to the field.
Comprehensive feature set
The next generation ST 6100 leverages the latest technology advancements to offer enhanced functionality at great value. The internal antenna features exceptional low elevation angle performance, allowing one device to support both terrestrial and maritime applications. The terminal also features a built-in accelerometer, expanded memory capacity, and enhanced support for global navigation systems-GPS, Glonass and Beidou.
- Fully programmable
- Comprehensive integration resources for quick deployment
- Two-way satellite communications
- Ruggedized and versatile
|
|
|
|
SPECIFICATIONS ST 6100
|
|
Satellite communication
- Satellite service two-way, Global, IsatData Pro
- From-mobile message: 6,400 bytes To-mobile message: 10,000 bytes
- Typical latency: <15 sec, 100 bytes Elevation angle: -5 to+90
- Frequency: Rx: 1518.0 to 1559.0 MHz; Tx: 1626.5 to 1660.5 MHz;1668.0 to 1675.0 MHz
- EIRP: <7.0dBW
- GPS/Glonass/Beidou Acquisition time: Hot: 1 second;Cold: 29/30/36 seconds Accuracy: 2.0m CEP
Sensitivity
- Acquisition: -148 dBm
- Tracking: -163 dBm
Certification
- Regulatory: CE, FCC, IC, Anatel, RCM Mark, Mexico; Pending: FFA, MSS Russia, SRRC, Philippines, Korea, IEC 60945, C1D2
- Others: Inmarsat Type Approval, IP67
Electrical
- Input voltage: 9 to 32V; Load dump protection: +150V; SAE J1455 (Sec. 4.13)
- Power consumption (typical average @12V DC, 22C):
- IDP Receive: 65 mA;
- GPS/Glonass/Beidou Receive: 22 mA;
- Transmit: 0.65 A;
- Sleep: 100 uA
Dimensions
- 12.6 cm x 12.6 cm x 4.9 cm
External interfaces
- Inputs/outputs: 4 analog or digital in/out
- Serial: RS-232; RS-485
Environmental
- Operating temperature: -40C to +85C
- Dust and water ingress: IP67
- Vibration: SAE J1455 (Sec 4.9.4.2 fig 6-8); MIL-STD-810G (Sec 514.6)
- Shock: MIL-STD-810G (Sec 516.6)
Programming
- Lua scripting engine with core services. SDK with GUI development tools available. Lua software application upgradable over the air (SOTA).
- Core services: Geofence, data logger, position reporting, accelerometer events, serial communications.
- Optional configurable device-level applications, including:
- Analytics Agent - Notifications and reports for driver behaviour and vehicle/asset performance.
- AVL Agent - Facilitates integration of ST 6100 terminals into fleet management solutions.
- Garmin Dispatch Agent - Tracking, navigation, driver communication and dispatch using Garmin devices.
- Garmin FMI Agent - Fleet management support for two-way text messaging, stops, driver ID, hours of
- service, file-transfer, custom forms, and speeding alerts.
Accelerometer
Memory
- Lua Code RAM: 4MB
- Lua Code NVM: 6MB
Options
- Side or bottom connector variants
Ordering Codes/related products
- ST6100-SXX ST 6100 Terminal, Side Connector
- ST6100-BXX ST 6100 Terminal, Bottom Connector
- ST100030-001 Mating Cable Connector Kit with Solder Cups
|
|
|
|
|
IsatData Pro IDP-780 flex Modem (discontnued)
|
|
Note: Repalced by the new IDP 782.
|
|
|
IsatData Pro IDP 782
Dual-Mode or Cellular Vehicle Tracking and Driver Monitoring Vehicle telematics for fleet management applications, using cellular or cellular-satellite communications
|
|
Overview |
The feature-rich, fully programmable IDP 782 delivers connectivity to assets in fleet management applications both in and out of cellular range. The IDP 782 is available as cellular-only or as an integrated, dual-mode cellular-satellite device.
For dual-mode applications, fleet managers get the best of both worlds lower cost cellular coverage and reliable, always-on satellite communications over the two-way IsatData Pro satellite data service anytime the cellular network is unavailable all from EX4U Telecom, your single source provider.
The IDP 782 features a flexible architecture that supports the development of custom applications for more complex solutions, and the use of configurable software applications for quicker deployments.
The IDP 782 is ideal to use for vehicle monitoring offering complete visibility of transport vehicles moving in and out of cellular coverage, vehicle telematics and reports for security, tracking, geofencing, driver identification and accelerometer, to the Online Tracking Platform. The IDP 782 also facilitates driver communications enabling two-way text messaging, e-forms, stop management and emergency voice, monitoring of driver behaviour, fuel efficiency, safety and vehicle operation/maintenance Other uses include vessel monitoring in the leveraging of lower cost cellular for near-shore communications, and satellite for guaranteed/backup offshore communications. Use the IDP 782 dual mode satellite-cellular connectivity in oil and gas applications to track utility vehicles travelling in and out of remote areas or as a backup for fixed equipment. The IDP 782 also allows for remote SCADA monitoring and control. An optional dust and splash cover accessory wraps around the terminal and achieves IP65 (ingress protection) rating when mounted to a rigid surface. This accessory increases market reach to coastal applications. Backup Battery With the optional IDP 782 backup battery, the terminal will continue reporting over satellite or cellular networks when the main power source is interrupted or compromised for anywhere from 12 hours to several days depending on conditions. For security, this means programming the terminal to automatically send more frequent position reports to improve driver safety, minimize vehicle theft and enable recovery.
Emergency Voice In cases of emergency, the IDP 782 now supports a two-way voice call (to one of two preprogrammed phone numbers) using an external input such as a panic button. This requires the integration of a microphone and a speaker to the terminal. For security applications and hijacking situations, the IDP 782 allows silent calls, where dispatch is able to hear inside the vehicle's cabin. Key Features
- Support for applications, Supports IDP LSF, and custom Lua scripting
- Native 1-Wire for iButton reader and temperature sensors
- CAN bus: J1939 protocol support
- USB/Serial port for programming and debugging
- Dual SIM
- Support for HTTP cellular protocol (MTWS) and new efficient binary protocol (MTBP)
- Dual-mode Satellite and Cellular (GPRS or HSPA) terminal with seamless switching
- Supports new bit-efficient cellular protocol (MTBP)
- In-cab installation terminal enclosure is not waterproof (IP40)
- Standard or low-elevation waterproof remote antenna options (IP67)
- Accelerometer for driver monitoring applications / OTP
- 6 I/Os, 2-RS232, 1-RS485, 1-CANbus, 1-wire
- -40C to +85C operating temperature
SPECIFICATIONS IDP 782
SATELLITE COMMUNICATION
- Satellite service: Two-way, Global, IsatData Pro
- From-mobile message: 6,400 bytes
- To-mobile message: 10,000 bytes
- Typical latency: <15 sec, 100 bytes
- Elevation angle: +20 to +90 (remote antenna); -15 to +90 (low elevation antenna)
- Frequency: Rx: 1525.0 to 1559.0 MHz; Tx: 1626.5 to 1660.5 MHz
- EIRP: <7.0 dBW
CELLULAR COMMUNICATION
- GPRS frequencies: 850/900/1800/1900 MHz
- HSPA frequencies: 800/850/900/1900/2100 MHz
- SIM: 3.3V/1.8V SIM
- Security: jamming detection
GPS
- Acquisition time: hot: 1 second; cold: 27 seconds
- Accuracy: 2.5m CEP-horizontal
- Sensitivity: acquisition: -148 dBm; tracking: -159 dBm
- Security: GPS signal jamming detection
CERTIFICATION
- Regulatory: CE (R&TTE, RoHS 2), FCC, IC, PTCRB (HSPA only)
- Other: Inmarsat type approval
EXTERNAL INTERFACES
- Inputs/outputs: 4 x config. Analog/digital inputs/outputs 2 x dedicated outputs (sink-ground)
- Serial: 2 x RS-232; 1 x RS-485; 1-CAN bus; 1-Wire
- Accelerometer: 3 axis
ELECTRICAL
- Input voltage: 9 to 32V; load dump protection: +150V; SAE J1455 (Sec. 4.13);
- Battery backup: >12 hours operation with 1-minute cellular reporting or 10-minute satellite reporting
ENVIRONMENTAL
- Operating temperature: transceiver and antenna: -40C to +85C; back-up battery: -10C to +60C;
- Dust and water ingress: transceiver: IP40 (IP65 with optional shroud); satellite antenna: IP67; GPS antenna: IP67
- Vibration: SAE J1455 (Sec 4.9.4.2 fig 6-8); MIL-STD-810G
- Shock: MIL-STD-810G (Sec 516.6)
PROGRAMMING
- Lua scripting engine with core services, Lua software application upgradable over the air (SOTA) integrated in the OTP (Online Tracking Platform).
- Geofencing: 128 Polygons
- Data Logger: 50,000 position reports; auto-upload in cellular coverage
- Optional, configurable device-level applications:
- OTP AVL agent - facilitates integration of IDP terminals into OTP fleet management solution.
- OTP Garmin Dispatch Agent - tracking, navigation, driver communication and dispatch using Garmin devices.
- J1939 Agent - vehicle CAN bus connectivity for monitoring driver behavior and vehicle/asset performance.
- ARC Agent - asset alarms, periodic reports and remote control.
- Analytics Agent - notifications and reports for driver behaviour and vehicle/asset performance to OTP.
Order codes and related products SM201329-HNU IDP-782 Transceiver with cellular antenna (HSPA) SM201329-HBU IDP-782 Transceiver with cellular antenna (HSPA, Battery) ST901065-AFA IDP Remote antenna ST901066-AFA IDP Low elevation remote antenna SM201361-001 IDP-782 Starter Kit (USA) SM201361-002 IDP-782 Starter Kit (Rest of World) SM201361-003 IDP-782 Starter Kit (Canada) ST100340-001 IDP-782 Development Kit ST100382 IDP-782 terminal shroud, IP65 SM201455-HBA IDP-782 cellular, battery, AT&T SM201455-HNA IDP-782 cellular, AT&T SM201455-HBV IDP-782 cellular, battery, Vodafone SM201455-HNV IDP-782 cellular, Vodafone ST100445-001 IDP-782 cellular antenna kit ST100446-001 IDP-782 cellular external gps/gsm combo antenna
|
5 Reasons to Choose the IDP-782 for Vehicle Telematics and Tracking Applications
1. Flexible Programming Flexible platform supports the development of custom applications for specific customer requirements and quicker time to market.
2. Save on Airtime Automatically switch between cellular coverage when available and satellite in remote areas for significant cost savings. Also available as a cellular-only device.
3. Backup Battery Features a backup battery option to enable reporting for up to 2.5 hours when no vehicle power is available.
4. Feature-Rich Built-in 1-Wire, CANbus, accelerometer, dual SIM, sensor ports and more, allow for a robust tracking and monitoring solution.
5. Enhanced Security Improve driver, vehicle and cargo security with reliable, always-on communications.
|
|
IsatData Pro IDP 800
|
|
Satellite Communication Terminals
Low-profile, battery-powered satellite terminal for tracking low-power assets.
Uses batteries or vehicle power Two-way communication Save on airtime Slim profile Protect cargo and drivers
|
IDP-800 is the first low-profile satellite communications terminal with an integrated battery compartment that uses the two-way IsatData Pro satellite data service for remotely tracking and managing fixed and mobile assets anytime, anywhere.
This slim profile terminal is ideal for tracking trailers, containers, vehicles and vessels, and can either be powered by non-rechargeable or rechargeable batteries, or by vehicle power. The IDP-800 can also be purchased with optional remote antenna.
Fully customizable and environmentally sealed, IsatData Pro terminals are specifcally designed to provide visibility and communications with people and equipment even in the world's harshest environments. IsatData Pro offers enhanced reliability and the ability to deliver up to 37 times more data in seconds - more than other satellite-based machine-to-machine (M2M) services in the market.
OTP based solutions include applications, tools and unparalleled customer support designed to quicken time to market and reduce implementation costs. With our competitive hardware and airtime pricing packages, businesses can accurately budget communication costs without roaming charges, and equip fleet and asset management groups regardless of location.
IDP/OTP Sample applications
- Trailers & Containers: Track the location and temperature of containers and trailers, enhance cargo security and prevent theft.
- Railcars: Locate railcars, improve operational efficiency, workflow, asset distribution, and realize cost savings.
- Vehicles: Keep track of operational status, fuel levels, driver behaviour and location of valuable cargo.
- Vessels & Barges: Enable reliable ship-to-shore communications and use as a vessel safety device with panic button.
- Heavy Equipment: Monitor equipment usage and status to detect misuse and enable preventative maintenance.
IDP 800 SERIES Specifications
Satellite communication
- Satellite Service: Two-way, Global, IsatData Pro
- From-Mobile Message: 6,400 bytes
- To-Mobile Message: 10,000 bytes
- Typical Latency: <15 sec, 100 bytes
- Elevation Angle: +20 to +90 (Integrated or remote antenna); -15 to +90 (Low elevation antenna)
- Frequency: Rx: 1525.0 to 1559.0 MHz;
- Tx: 1626.5 to 1660.5 MHz
- EIRP: 7.0 dBW
GPS/Glonass
- Acquisition Time: Hot: 1s; Cold: 29s/30s
- Accuracy: 2.5m/4.0m CEP-Horizontal
- Sensitivity (Tracking): -162 dBm/-158 dBm
Certification
- Regulatory: CE (R&TTE, RoHS 2), FCC, IC, Inmarsat Type
- Approval
- Others: IP67
Electrical
- Input Voltage: 9 to 32V; Load dump protection: +150V; SAE J1455 (Sec. 4.13); Auto Switchover
- Power Consumption (Typical @12V DC, 22C):
- Average receive: 8.3 mA;
- Receive with GPS/GLONASS: 40 mA; Transmit: 0.75 A; Sleep: 100 pA; Power off: 12 pA
- Battery Cells: 12 AA Cells
- Battery Chemistry: Rechargeable: NiMH; Nonrechargeable: LiFeS2
Dimensions
- IDP 800: 43.2 cm x 14.7 cm x 2.5 cm
- IDP Remote Antenna: 12.6 cm x 9.3 cm x 7.4 cm
- IDP Remote Antenna Low Elevation: 12.6 cm x 9.3 cm x 2.5 cm
Charging
Mass
- With batteries: 1.3 Kg (with integrated antenna)
External interfaces
- Inputs/Outputs: 3 x Analog or Digital In/Out
- Serial: 1 x RS-232
- Accessories: 1-Wire adapter via RS-232 port
Environmental
- Operating Temperature: -40C to +85C (batteries not included) ; -40C to +60C (Non-rechargeable) ; -10C to +50C (Rechargeable)
- Dust & Water Ingress: IP67
- Vibration: SAE J1455 (Sec 4.9.4.2 fig 6-8); MIL-STD- 810G (Sec 514.6)
- Shock: MIL-STD-810G (Sec 516.6)
Programming
- Lua scripting engine with core services. SDK with GUI development tools available. Lua software application upgradable over the air (SOTA), integrated in OTP.
- User Data Memory: 3.5 MB
- Geofencing: 128 Polygons
- Data Logger: 50,000 Position Reports
- Optional, Configurable Device-Level Applications:
- Analytics Agent - Notifications and reports for driver behaviour and vehicle/asset performance.
- AVL Agent - Faciliates integration of IDP terminals into OTP fleet management solutions.
- Garmin Dispatch Agent - Tracking, navigation, driver communication and dispatch using Garmin devices & OTP webform.
Order codes and related products SM201225-CXX Integrated Antenna Batteries: Not Included/Non-Rechargeable SM201225-DXX Integrated Antenna Batteries: Included/Non-Rechargeable SM201226-CXX Integrated Antenna Batteries: Not Included/Rechargeable SM201226-DXX Integrated Antenna Batteries: Included/Rechargeable SM201227-CXX Remote Antenna Batteries: Not Included/NON-Rechargeable SM201227-DXX Remote Antenna Batteries: Included/Non-Rechargeable SM201228-CXX Remote Antenna Batteries: Not Included/Rechargeable SM201228-DXX Remote Antenna Batteries: Included/Rechargeable ST100325-001 1-Wire Adapter ST100231-001 Development Kit (Airtime, training and support included. Terminal purchased separately)
|
5 Reasons to Choose the IDP-800 for Trailer and Vessel Monitoring
1. Battery Powered Uses regular or rechargeable batteries or vehicle power. Three year battery life with once a day reporting.
2. Two-way Communication Uses the global Inmarsat constellation, offering high payload and low latency.
3. Save on Airtime Onboard geofencing and accelerometer detects motion to transmit only when moving.
4. Low-profile Slim profile design and easy installation makes it ideal for tracking and monitoring trailers, containers and vessels.
5. Enhance Cargo Security and Operator Safety Protect cargo, drivers and maritime safety with panic button, door sensors, power cut detection, GPS jamming and more.
|
SG-7100 Cellular Gateway
Cellular Communications Gateway
Fully programmable, broadband connectivity for fleet management and fixed asset monitoring applications.
|
|
Overview |
The SG-7100 cellular communications gateway is a powerful cellular platform with optional Wi-Fi and satellite, providing broadband connectivity for easy integration into fleet management and industrial fixed asset monitoring applications.
Ideal for sending mission-critical data from the field to the back office, the versatile SG-7100 creates a vital communications link that enables functions like dispatch, electronic forms/signatures, location-based services, HOS (hours of service) reports, collection of equipment data and much more.
The expandable, fully programmable SG-7100 also supports multiple LAN and WAN interfaces and features an onboard web server for forms in logistics applications. Designed to accelerate time to market, the smart devices configurable applications, modular hardware architecture and optional expansion cards offer the flexibility to meet evolving asset management challenges.
The cellular gateway platform takes the next step in M2M communications with our OTP for fleet management, in-cab messaging, workflow automation, and supervisory control and data acquisition (SCADA) applications.
Sample applications include:
Transportation
- Fleet management
- Workflow automation
- Vehicle maintenance
- Telemetry
- Dispatch and navigation
- Wi-Fi access point
SCADA & Fixed Equipment
- Primary/backup communication for SCADA systems
- Secure VPN IP access for PLCs, RTUs and other equipment
- Remote sensor data collection and control
- Building automation
- Video surveillance
- Device-agnostic connectivity
Key Features
- Fully Programmable and Configurable
- Modular Hardware Architecture
- Multiple configuration options for cellular, Wi-Fi, satellite, and ethernet networking
- One-wire, serial, USB, Ethernet, digital and analog peripheral port options.
- Integrated SkyWave Lua Services Framework and open Linux environment.
- Integrated HTML 5 Compatible Web Server
|
|
SG 7100 Specifications |
Processor and operating system
- Processor: ARM9, 450MHz
- Memory: 64 MB
- Flash: 128MB
- Operating System: Linux Open WRT
- Application Interfaces: TCP/IP
- UDP/IP, DHCP HTTP
- IP Router PPP HTTP Web server Telnet/SSH server NAT NMEA GPS
- IP forwarding
- Security: VPN (SSL v2, TLS v1), SSH server, SCP, SFTP
Cellular HSPA Penta-Band: 800/850/1800/1900/2100 MHz diversity capability. Fallback to HSDPA/UMTS/EDGE/GPRS EVDO Rev A Dual-Band: 800/1900 MHz diversity capability. Fallback to CDMA 1x Rev 0 and CDMA 1xRTT SIM: Single slot. Dual slot with telematics expansion card
Certification Regulatory: Fully certified FCC, CE, IC, PTCRB, Applicable carriers
External interfaces
- Standard:
- (Optional) Telematics Expansion card:
- 1 x USB OTG, 1 x USB host
- 2 x RS-232 or 1 x RS-232 and 1x RS-485
- 1 x CAN bus
- 1 x 1-wire interface
- 3 x Digital/Analog In
- 2 x Digital Out
- 2 x Dedicated Analog (0 to 10 V, 12 bit resolution)
- Accelerometer: 3-axis, 12 bit
- (Optional) Serial card: 1 x RS-232
- (Optional) Industrial Serial Card: 1 x RS-485
- 1 x RS-232
- Status LEDs: Status, Communication, GPS
Environmental
- Operating temperature: -30 to +70C Dimensions
- 11.5 cm x 10.5 cm x 4.5 cm
Wi-Fi (optional)
- Service: IEEE 802.11b/g/n
- Frequency: 2.4 GHz
Satellite (optional)
- Service: IsatData Pro (IDP), Two-way, Global
- Frequency: Rx: 1525.0 to 1559.0 MHz; Tx: 1626.5 to 1660.5 MHz
- Elevation Angle: Up to -15 to +90
GPS
- Standalone GPS, Assisted GPS, gpsOneXTRA Assistance
- Wideband GPS Processing (20MHz) for improved measurement accuracy
- Option: Dual GPS and GLONASS with optional satellite
Electrical
- Input Voltage: 9 to 32 Volts DC, Optional SAE J1455 load dump protection
- Power Consumption (Typical @12V DC):
- 121 mA (connected to GPRS network)
- 772 mA (peak transmitting, GPRS)
OTP - Development support
- M2M Messaging: Lua Services Framework with core services and API. SDK with GUI-based development tools.
- Web Services: Web server installed.
- Optional, Configurable Device-Level Applications:
- Analytics Agent - Notifications and reports for driver behavior and vehicle/asset performance.
- AVL Agent - Facilitates integration of IDP terminals into fleet management solutions.
- Garmin Dispatch Agent - Tracking, navigation, driver communication and dispatch using Garmin devices.
- J1939 Agent - Vehicle CAN bus connectivity for monitoring driver behaviour and vehicle/asset performance.
- ARC Agent - Alert on critical events, report status proactively and control simple devices remotely.
|
|
IsatData Pro coverage
|
Inmarsat Satellite M2M Network for Two-Way Data Communications
IsatData Pro is the fastest low-data rate satellite communications service specifically designed to connect people with equipment and enterprise applicationsanytime, in the worlds most remote locations. Using the two-way Inmarsat satellite network, IsatData Pro operates over geosynchronous satellites in geostationary orbit (GEO), with a robust infrastructure of ground stations located around the globe.
IsatData Pro offers enhanced reliability and the ability to deliver more data than other satellite M2M services in the market. This allows businesses to share more data across diverse operations via email, text message, electronic forms and workflow automation.
Why L-Band?
Inmarsat's global L-band satellite network offers the highest payload and lowest latency of any L-band satellite store-and-forward service, providing 99.9% network availability and a ubiquitous, resilient and flexible solution for remote monitoring of fixed and mobile assets.
The IsatData Pro network is also not subject to rain fade or impacted by other harsh weather conditions. IsatData Pro devices do not require antenna pointing, simplifying installation and adding to the reliability of unmanned terminals in an open environment.
- Higher Messaging Capability
- Quicken Message Delivery
- Lower Power Consumption
- Global Coverage
Limitless Industry Applications
Whether its used for managing trucks, fishing vessels or oil and gas equipment, IsatData Pro facilitates increases in business efficiency, lowering of operation costs and compliance with government regulations.
The IDP series supports a wide range of security and location-based M2M services, from tracking and in-cab messaging for transportation and maritime fleets, to transmitting telemetry information from oil and gas distribution equipment, to remote management and control of heavy equipment and fixed assets.
IsatData Pro At-a-Glance
- Global, Two-Way, Reliable Inmarsat Satellite Service
- Higher Messaging Capability (Up to 6.4/10 kBytes from/to device)
- Lowest Latency (< 15s latency for 100 bytes)
- Supports Broadcasting, Multicasting
- Cost-Effective Data Plans, Pooling Options
|
OTP - Online Tracking Platform
|
Back to Products Back to Services
|
|
|
|
|
|
|
|
|